# Record your screen on Mac, trim it and share a link or a GIF

> Floppy for Mac 1.10.0 can record your screen: press ⌥⇧⌘5, pick an area, a window or the whole screen, and it records after a 3, 2, 1 countdown. The recording lands on a card at the bottom left. Trim it, save it as a GIF, or click Share link for a fpy.sh link that plays it. Nothing uploads until you click.

Floppy 1.49.0, released 2026-11-19. Updated 2026-11-19. https://fpy.sh/changelog/record-your-screen-on-mac-and-share-a-link

## How do I record my screen with Floppy for Mac?

1. Press `⌥⇧⌘5`, or choose **Record Screen…** in the menu bar icon's right-click menu. The screen freezes, as for a screenshot.
2. Drag over an area, press **Space** and click a window, or click without dragging to record the whole display. `Esc` cancels.
3. A **3, 2, 1** countdown shows in the middle of what you picked. `Esc` or the shortcut cancels it; a click on the number starts at once.
4. While it records, a thin blue frame marks an area, and the floppy in the menu bar becomes a **stop button** with the elapsed time.
5. Click the stop button or press `⌥⇧⌘5` again. **Stop Recording** and **Cancel Recording** are in the right-click menu too.

`⇧⌘5` stays with macOS. The first recording asks for the Screen Recording permission, the same one [screenshots](https://fpy.sh/changelog/take-a-screenshot-and-share-a-link-on-mac) use. If another app holds `⌥⇧⌘5`, Settings › Shortcuts says so, and Record Screen… in the menu still works.

## What does a Floppy screen recording include?

| | |
|---|---|
| File | H.264 MP4 at 30 fps, named like `Screen Recording 2026-11-19 at 14.02.31.mp4` |
| Size | The display's own resolution, the long side at most 3840 px. About 58 MB a minute at 2880 × 1800, much less when the screen is still |
| Cursor | Recorded. Clicks aren't drawn |
| Microphone | Off. Turn on **Record microphone** in Settings › Recordings (macOS 15 and later). macOS asks for the permission the first time |
| System audio | Not recorded |
| Floppy's own cards and frame | Left out of the recording |

Recordings are saved to `~/Floppy`, in the month's folder, and kept until you delete them. **Save to the Floppy folder**, in Settings › Screenshots, turns that copy off; the recording is then only in Floppy's Library. If a recorded window closes, or its display goes away, the recording ends and keeps what it has.

## How do I trim a screen recording on Mac?

Hover the recording's card and click **✂** in its top-left corner, or choose **Trim Last Recording** in the menu bar icon's right-click menu. The trim window shows the recording over a filmstrip with two blue handles and a playhead.

- Drag the handles to set where it starts and ends. The range is at least half a second.
- `Space` plays and pauses, inside the range. `←` and `→` move one frame, with `⇧` one second.
- `I` and `O` set the start and the end at the playhead.
- The bottom right shows the range's length and its estimated size.

Click **Done** (`⌘S` or `Return`) and Floppy saves the range under the same name, in the same places. It re-encodes it, so the cut is exact to the frame everywhere it plays. The untouched recording is kept next to it, so opening the trim window again shows the whole thing with your range, and you can widen it later. Closing with changes asks **Keep your changes?**

## How do I turn a screen recording into a GIF?

In the trim window, set the range and click **Save as GIF**. Floppy makes a looping GIF of that range at 15 frames a second, at most 960 px wide, and up to 30 seconds long. A longer range turns the button off until you trim it shorter.

Frames that don't change are merged into one, so a mostly still screen makes a small file. The GIF is a capture of its own, saved next to the recording, and gets its own card: **Copy** puts the GIF on the clipboard for Slack, Mail or Messages, and **Share link** gives it a fpy.sh link. The trim window stays open and says **GIF saved** with its size.

## How do I share a screen recording as a link?

Hover its card and click **Share link**. Floppy uploads the MP4 and copies a fpy.sh link, which shows along the bottom of the card while it uploads. Whoever opens the link watches the recording in the browser, no app needed, and you see who watched it. Floppy's free plan takes files up to 500 MB; Pro and Studio up to 50 GB.

Trimmed it after you shared it? **Done** replaces the file behind the same link, like any [replaced file](https://fpy.sh/changelog/replace-a-shared-file-keep-the-same-link). The card says **Updating fpy.sh/k3x9…**, then **Same link, new recording ✓**, and the people you sent it to see the trimmed version.

The card itself changed in 1.10.0: the screenshot or recording fills it, with no text. On hover the picture blurs and the controls show inside it: Share link and Copy in the middle, ✎ or ✂ top left, ✕ top right, the pin bottom left (screenshots, see [pin a screenshot](https://fpy.sh/changelog/pin-a-screenshot-on-top-of-every-window)), and save bottom right (⌥-click shows it in Finder). Once shared, a thin strip shows the link.

## For AI agents

Recording, trimming and making GIFs happen in the Mac app: agents can't record a screen through Floppy. They can share a recording you made and keep its link current.

- **MCP:** `upload_file` shares an MP4 or a GIF. `replace_file { link_id, name, url }` puts a new version behind the same link (`link_id` can be `fpy.sh/k3x9`); pass only `size` for a multipart upload plan when the file is big.
- **REST:** `PUT /api/v1/links/:id/replace/:filename` with the file as the body (up to 100 MB). Bigger files use `POST /api/v1/links/:id/replace` and upload parts.

`get_link_analytics` then says who watched it. The [agents guide](https://fpy.sh/docs/agents) has every call.

## FAQ

### Does Floppy for Mac record sound?

Floppy records the microphone when Record microphone is on in Settings › Recordings, on macOS 15 and later. It doesn't record system audio.

### Does a screen recording upload by itself?

No. A Floppy recording stays on your Mac until you click Share link on its card. Copy puts the file on the clipboard instead.

### Does trimming a shared recording change its link?

No. Done replaces the file behind the same fpy.sh link, and the card says Same link, new recording. The link's views and settings stay.

### How long can a GIF be?

Up to 30 seconds. Floppy makes GIFs at 15 frames a second and at most 960 px wide, from the range you set in the trim window.

### Can I keep the untrimmed recording?

Yes. Floppy keeps the original next to the trimmed file on your Mac, so reopening the trim window shows the whole recording and you can change the range.

## What shipped in 1.49.0

- Floppy for Mac 1.10.0: ⌥⇧⌘5 records an area, a window or the screen after 3, 2, 1. Stop it from the menu bar
- ✂ on the recording's card trims it with two handles. Save as GIF puts a GIF on its own card
- Trim a recording you've already shared and the same fpy.sh link shows the new one
- Capture cards are the picture now. Hover for Share link, Copy and the corner buttons; the link shows along the bottom

## Related

- [Take a screenshot on Mac and share a link](https://fpy.sh/changelog/take-a-screenshot-and-share-a-link-on-mac)
- [Annotate a screenshot on Mac](https://fpy.sh/changelog/annotate-a-screenshot-on-mac)
- [Pin a screenshot on top of every window](https://fpy.sh/changelog/pin-a-screenshot-on-top-of-every-window)
- [The Floppy for Mac guide](https://fpy.sh/docs/mac)
- [Floppy for Mac](https://fpy.sh/mac)

All releases: https://fpy.sh/changelog · Everything for LLMs: https://fpy.sh/llms.txt
